Zigbee PIR Motion Detector TM-MD01

Share to:

Pyroelectric infrared sensing technology, sensitive to the  identification of heat changes, intelligent sensing of human  movement.

 

Communication Mode

ZigBee

Dimension

ø48X53.2mm

Operating Temperature

-10~55℃

Power Supply

DC 3V (CR123A)

Material

Fireproof PC+ Fireproof ABS

Installation

2.2M glue, Magnetic suction

Detection distance

8 meters

Detection angle

≥90°

  • TM-MD01
  • Transmei
  • HS code
  • 50g
  • ø48X53.2mm
  • white
  • Fireproof PC+ Fireproof ABS
  • 250
Quantity:

Pyroelectric infrared sensing technology, sensitive to the  identification of heat changes, intelligent sensing of human  movement.

Communication Mode

ZigBee

Dimension

ø48X53.2mm

Operating Temperature

-10~55℃

Power Supply

DC 3V (CR123A)

Material

Fireproof PC+ Fireproof ABS

Installation

2.2M glue, Magnetic suction

Detection distance

8 meters

Detection angle

≥90°


image


image



PRODUCT`S CHARACTERISTICS

360° rotatable design for quick and easy installation  

Low battery indication function

Anti-white light function

Low power consumption microprocessor, long standby  

Digital temperature compensation technology

Send status report to the gateway periodically

Network Setting 

1.Power on the product.

image

Rotate the battery cover anticlockwise to open.

image


Remove the battery insulation film to power on the product,the red LED will flash slowly for self-checking.


2. Press and release the reset button 5S, the green LED indicator will flash for network settings.

image


Distribution network tips:

Press the reset button 5s-10s, the red LED lights once Red LED goes out, release the reset button, green LED Blinking, indicating that you are ready for network settings. The green LED indicator will light up for 5 seconds and then turn off to indicate .The network setting is successful. If it fails, the green indicator goes off.



3. Installation instructions: 

(1) After booting, the product will enter the self-test state, and

The red LED will flash for 60 seconds. 

(2) After self-inspection, the product enters the test mode for 5 minutes.When it detects human movement, the red LED flashes and sends a Warning sign. 

(3) In the working state, press the setting button, the red indicator light flashes once,Then enter the test mode. 

(4) After the test mode is completed, enter the normal working state Mode, the initial state is no one, someone triggers, the red light is on,Report information. Report information within 1 minute When someone is detected, until no one is detected and no one is detected Reported that no one was pulled until 1 minute.


Installation instructions 

1. Installation location: Install the product where it may cause personal injury.Cross detected. It is recommended that the product

2.2m above the ground, as shown in the figure below.

image

2. Product installation: remove the protective film on the adhesive Fix it on the base and fix the base to the installation position.Install the product on the base correctly.

image

3. Matters needing attention

 (1) There should be no objects in the range of objects. Products, so as not to affect the test results.

 (2) Between the product and the gateway, if there are buildings (such as walls,Etc.) will shorten the wireless communication distance


(3) The installation location of the equipment should be far away Air conditioners, electric fans, refrigerators, ovens and other items Will cause temperature changes, direct sunlight should be avoid.

image


Toxic or harmful substances or elements

image


Warranty certificate for this product

Warranty policy: 

1. If the product has quality problems within 7 days after payment On the date, you can apply for a refund based on the invoice price, or you can

2. If the product has quality problems within 15 days after payment, please replace it with the same model or repair it.Date, you can apply to replace the product with the same model or the following model

Repaired. 

3. If the product has quality problems within 12 months after warranty,On the payment date, you can apply for repairs. 


What is warranty does not include: 

1. The product owner has no warranty certificate or warranty

The service has expired. 

2. Damage caused by improper use, maintenance or storage. 

3. Damage caused without Tuya's disassembly and repair. Authorization 

4. Damage caused by force majeure 

5. The product will change color and depreciate normally after use

used



Related Products

CONTACT US
   Tel: +86-519-83871319
   Email:  Jessie@transmei.net
   Address: Floor 4 No. 31 Houlu Village, Niutang Town, Wujin District ChangZhou, JiangSu, China

IOT SOLUTION

QUICK LINKS

Copyright © 2021 ©️ TRANSMEI ELECTRONIC TECHNOLEGY CO.,LTD.